Tim A.

Hello,

I have a predicament that hopefully a technically savvy DJ will be able to
solve for me.

Problem 1:

I am using PCDJ as my setup on a laptop, with an Edirol UA-1A external sound
device (1 dual RCA input, and 1 dual RCA output). I am using option 6 in
PCDJ (I think) for hardware configuration, the one that allows player A to
come out sound card 1 (Edirol), and player B to come out sound card 2 (on
board), so that I plug each into a different line in on my mixer allowing me
to use my crossfader and volume controls on two channels. The problem is,
the mixer only has one microphone input, and needing two I want to try and
use the mic input from my onboard soundcard. So far I can get the microphone
to work, but sending the audio directly to the computer. But I can't get the
audio coming in that microphone to come out to my mixer. Any suggestions?

Problem 2:

I often use Soundforge to record parts of my gigs, including toasts,
speeches, and specific songs. Using the Edirol UA-1A's inputs I am splitting
the output from my Amp out on the mixer to go to the amp, and the inputs on
the UA-1A. I can't seem to get SoundForge to recognize the audio coming in
whilst I am using PCDJ, or otherwise. This also brings me back to the
problem of not being able to use my Mic input on my laptop to go out to the
mixer.

I am in the market for a two mic input, 2-3 channel mixer if anyone knows a
good one. See my post regarding this issue.

Thank you so much for any and all replies.

Tim A.

Visionism

On Wed, 25 Jun 2003 12:24:06 -0700, Tim A. wrote:

> Hello,
>
> I have a predicament that hopefully a technically savvy DJ will be able to
> solve for me.
>
> Problem 1:
>
> I am using PCDJ as my setup on a laptop, with an Edirol UA-1A external sound
> device (1 dual RCA input, and 1 dual RCA output). I am using option 6 in
> PCDJ (I think) for hardware configuration, the one that allows player A to
> come out sound card 1 (Edirol), and player B to come out sound card 2 (on
> board), so that I plug each into a different line in on my mixer allowing me
> to use my crossfader and volume controls on two channels. The problem is,
> the mixer only has one microphone input, and needing two I want to try and
> use the mic input from my onboard soundcard. So far I can get the microphone
> to work, but sending the audio directly to the computer. But I can't get the
> audio coming in that microphone to come out to my mixer. Any suggestions?
>
> Problem 2:
>
> I often use Soundforge to record parts of my gigs, including toasts,
> speeches, and specific songs. Using the Edirol UA-1A's inputs I am splitting
> the output from my Amp out on the mixer to go to the amp, and the inputs on
> the UA-1A. I can't seem to get SoundForge to recognize the audio coming in
> whilst I am using PCDJ, or otherwise. This also brings me back to the
> problem of not being able to use my Mic input on my laptop to go out to the
> mixer.
>
> I am in the market for a two mic input, 2-3 channel mixer if anyone knows a
> good one. See my post regarding this issue.
>
> Thank you so much for any and all replies.
>
> Tim A.

Open up your audio properties/mixer applet and make sure mute is unchecked
on the mic and line in channels. If you don't see those channels you can
make them visible by selecting Options > Properties then checking the
relevant boxes.

Visionism

On Wed, 25 Jun 2003 12:24:06 -0700, Tim A. wrote:

> Hello,
>
> I have a predicament that hopefully a technically savvy DJ will be able to
> solve for me.
>
> Problem 1:
>
> I am using PCDJ as my setup on a laptop, with an Edirol UA-1A external sound
> device (1 dual RCA input, and 1 dual RCA output). I am using option 6 in
> PCDJ (I think) for hardware configuration, the one that allows player A to
> come out sound card 1 (Edirol), and player B to come out sound card 2 (on
> board), so that I plug each into a different line in on my mixer allowing me
> to use my crossfader and volume controls on two channels. The problem is,
> the mixer only has one microphone input, and needing two I want to try and
> use the mic input from my onboard soundcard. So far I can get the microphone
> to work, but sending the audio directly to the computer. But I can't get the
> audio coming in that microphone to come out to my mixer. Any suggestions?
>
> Problem 2:
>
> I often use Soundforge to record parts of my gigs, including toasts,
> speeches, and specific songs. Using the Edirol UA-1A's inputs I am splitting
> the output from my Amp out on the mixer to go to the amp, and the inputs on
> the UA-1A. I can't seem to get SoundForge to recognize the audio coming in
> whilst I am using PCDJ, or otherwise. This also brings me back to the
> problem of not being able to use my Mic input on my laptop to go out to the
> mixer.
>
> I am in the market for a two mic input, 2-3 channel mixer if anyone knows a
> good one. See my post regarding this issue.
>
> Thank you so much for any and all replies.
>
> Tim A.

Open up your audio properties/mixer applet and make sure mute is unchecked
on the mic and line in channels. If you don't see those channels you can
make them visible by selecting Options > Properties then checking the
relevant boxes.

Bowza Entertainment UK

what have you got in the record mixer? u need some sort of stereo mix,
instead of wave/mp3. on sb audigy it's called 'what u hear' - don't know if
you'll have something similar on yours....

good luck

--
DJ Krissi B,
Bowza Entertainment UK

Visit My Page!
http://www.djcentral.com/djs/djinfo....66812&linkid=1
"Tim A." <tman@**NOSPAM**usa.com> wrote in message
news:d_qKa.706$IP6.31182@eagle.america.net...
> Thank you for the response, I have definately already checked the simple
> stuff. I can speak into the microphone, and see that Soundforge is
> registering me speaking into it, but I can't make the mic come out of the
> Edirol, or anything else for that matter so that I can hear it through my
> rig.
>
> Tim
>
> "Visionism" <visionismoca@yahoo.com> wrote in message
> newsan.2003.06.25.23.26.44.94000@yahoo.com...
> > On Wed, 25 Jun 2003 12:24:06 -0700, Tim A. wrote:
> >
> > > Hello,
> > >
> > > I have a predicament that hopefully a technically savvy DJ will be
able
> to
> > > solve for me.
> > >
> > > Problem 1:
> > >
> > > I am using PCDJ as my setup on a laptop, with an Edirol UA-1A external
> sound
> > > device (1 dual RCA input, and 1 dual RCA output). I am using option 6
in
> > > PCDJ (I think) for hardware configuration, the one that allows player
A
> to
> > > come out sound card 1 (Edirol), and player B to come out sound card 2
> (on
> > > board), so that I plug each into a different line in on my mixer
> allowing me
> > > to use my crossfader and volume controls on two channels. The problem
> is,
> > > the mixer only has one microphone input, and needing two I want to try
> and
> > > use the mic input from my onboard soundcard. So far I can get the
> microphone
> > > to work, but sending the audio directly to the computer. But I can't
get
> the
> > > audio coming in that microphone to come out to my mixer. Any
> suggestions?
> > >
> > > Problem 2:
> > >
> > > I often use Soundforge to record parts of my gigs, including toasts,
> > > speeches, and specific songs. Using the Edirol UA-1A's inputs I am
> splitting
> > > the output from my Amp out on the mixer to go to the amp, and the
inputs
> on
> > > the UA-1A. I can't seem to get SoundForge to recognize the audio
coming
> in
> > > whilst I am using PCDJ, or otherwise. This also brings me back to the
> > > problem of not being able to use my Mic input on my laptop to go out
to
> the
> > > mixer.
> > >
> > > I am in the market for a two mic input, 2-3 channel mixer if anyone
> knows a
> > > good one. See my post regarding this issue.
> > >
> > > Thank you so much for any and all replies.
> > >
> > > Tim A.
> >
> > Open up your audio properties/mixer applet and make sure mute is
unchecked
> > on the mic and line in channels. If you don't see those channels you can
> > make them visible by selecting Options > Properties then checking the
> > relevant boxes.
> >
> >
>
>

Bowza Entertainment UK

what have you got in the record mixer? u need some sort of stereo mix,
instead of wave/mp3. on sb audigy it's called 'what u hear' - don't know if
you'll have something similar on yours....

good luck

--
DJ Krissi B,
Bowza Entertainment UK

Visit My Page!
http://www.djcentral.com/djs/djinfo....66812&linkid=1
"Tim A." <tman@**NOSPAM**usa.com> wrote in message
news:d_qKa.706$IP6.31182@eagle.america.net...
> Thank you for the response, I have definately already checked the simple
> stuff. I can speak into the microphone, and see that Soundforge is
> registering me speaking into it, but I can't make the mic come out of the
> Edirol, or anything else for that matter so that I can hear it through my
> rig.
>
> Tim
>
> "Visionism" <visionismoca@yahoo.com> wrote in message
> newsan.2003.06.25.23.26.44.94000@yahoo.com...
> > On Wed, 25 Jun 2003 12:24:06 -0700, Tim A. wrote:
> >
> > > Hello,
> > >
> > > I have a predicament that hopefully a technically savvy DJ will be
able
> to
> > > solve for me.
> > >
> > > Problem 1:
> > >
> > > I am using PCDJ as my setup on a laptop, with an Edirol UA-1A external
> sound
> > > device (1 dual RCA input, and 1 dual RCA output). I am using option 6
in
> > > PCDJ (I think) for hardware configuration, the one that allows player
A
> to
> > > come out sound card 1 (Edirol), and player B to come out sound card 2
> (on
> > > board), so that I plug each into a different line in on my mixer
> allowing me
> > > to use my crossfader and volume controls on two channels. The problem
> is,
> > > the mixer only has one microphone input, and needing two I want to try
> and
> > > use the mic input from my onboard soundcard. So far I can get the
> microphone
> > > to work, but sending the audio directly to the computer. But I can't
get
> the
> > > audio coming in that microphone to come out to my mixer. Any
> suggestions?
> > >
> > > Problem 2:
> > >
> > > I often use Soundforge to record parts of my gigs, including toasts,
> > > speeches, and specific songs. Using the Edirol UA-1A's inputs I am
> splitting
> > > the output from my Amp out on the mixer to go to the amp, and the
inputs
> on
> > > the UA-1A. I can't seem to get SoundForge to recognize the audio
coming
> in
> > > whilst I am using PCDJ, or otherwise. This also brings me back to the
> > > problem of not being able to use my Mic input on my laptop to go out
to
> the
> > > mixer.
> > >
> > > I am in the market for a two mic input, 2-3 channel mixer if anyone
> knows a
> > > good one. See my post regarding this issue.
> > >
> > > Thank you so much for any and all replies.
> > >
> > > Tim A.
> >
> > Open up your audio properties/mixer applet and make sure mute is
unchecked
> > on the mic and line in channels. If you don't see those channels you can
> > make them visible by selecting Options > Properties then checking the
> > relevant boxes.
> >
> >
>
>

Roos

as far as i know, you can only get output from the Edirol if the mic is
plugged into that. the mixers are NOT chained in windows and thus if the mic
is plugged into the built in soundcard, that's the only place it'll come out
of.

if i read that post wrong lemme know.

"Tim A." <tman@**NOSPAM**usa.com> wrote in message
news:d_qKa.706$IP6.31182@eagle.america.net...
> Thank you for the response, I have definately already checked the simple
> stuff. I can speak into the microphone, and see that Soundforge is
> registering me speaking into it, but I can't make the mic come out of the
> Edirol, or anything else for that matter so that I can hear it through my
> rig.
>
> Tim

Roos

as far as i know, you can only get output from the Edirol if the mic is
plugged into that. the mixers are NOT chained in windows and thus if the mic
is plugged into the built in soundcard, that's the only place it'll come out
of.

if i read that post wrong lemme know.

"Tim A." <tman@**NOSPAM**usa.com> wrote in message
news:d_qKa.706$IP6.31182@eagle.america.net...
> Thank you for the response, I have definately already checked the simple
> stuff. I can speak into the microphone, and see that Soundforge is
> registering me speaking into it, but I can't make the mic come out of the
> Edirol, or anything else for that matter so that I can hear it through my
> rig.
>
> Tim